– 24 –
4-2. Thermal Roll Paper
• Paper width: 45 ± 0.5 mm to 112 ± 0.5 mm
• Paper thickness: 65
µ
m to 150
µ
m
• Roll paper outer dimensions
Roll diameter: ø110 mm maximum roll diameter
Overall width: 45 ± 0.5 mm to 112 ± 0.5 mm
• Core inner/outer diameters:
(1) When 65
µ
m paper thickness 75
µ
m
core inner diameter ø12 ± 1/core outer diameter ø18 ± 1
or core inner diameter ø25.4 ± 1 mm/core outer diameter ø32 ± 1 mm
(2) When 76
µ
m paper thickness 150
µ
m
core inner diameter ø25.4 ± 1 mm/core outer diameter ø32 ± 1 mm
• Finished state of roll paper:
Make sure the finished state of the roll paper meets the following conditions:
1) Face the coloring surface of the thermal roll paper outward of the roll.
2) Do not allow the core to protrude from the ends of the thermal roll paper.
3) Do not secure the tail end of the thermal roll paper with glue or tape. Do not fold the tail end
of the paper.
4) Do not allow the thermal roll paper to unravel.
5) Do not allow the thermal roll paper to become deformed at its outer diameter or core.
• Recommended thermal paper:
Print Density and Speed Settings
Depending on the type and thickness of the paper, it may be necessary to change
the settings for print density / speed. To change the settings, use the print density setting command
<ESC><RS> ‘d’ n and print speed setting command <ESC><RS> ‘r’ n. Refer to the separate
Specification Manual for details.
Product name
P220AG
PB670/PB770
Manufacturer
Mitsubishi Paper
Mills Limited
Quality features/applications
Normal type
2-color type red-black/blue-black
Thickness
(
µ
m)
65
87
Print density setting
n
3 (default)
3 (default)
Print speed setting
n
0 (default)
0 (default)
