SM SYGNUS SHC USER´S MANUAL
23
Figure: Cable connection to Outdoor Unit
Indoor
Outlet Installation
The Indoor Outlet is wall mounted.
The Indoor Outlet side cables assembled as follows:
1. Crimp the RJ-45 Plugs on cable ends to form the Outdoor Unit cable.
2. Plug the Outdoor Unit cable to the RJ-45 Jack marked “OUTDOOR”.
3. Plug standard CAT5 cable from the PC to the RJ-45 Jack marked “10/100 B-T”.
4. Plug the DC plug from the AC/DC power supply to the DC jack marked “48VDC”.
__________________________________________________________________________________
Note: Do not attach standard CAT5 cable from the PC to the Indoor Unit RJ-45 jack marked
“OUTDOOR”. Connecting the PC directly to the Outdoor
Unit may cause damaged to the Ethernet NIC in the PC
Figure: Indoor Unit with Power over Ethernet (PoE)