FT5X User Guide
2.3 Hardware Installation Steps
1
、
Unscrew the SIM cover on the underside of the FT5X, remove the
cover, insert a SIM and then reattach the SIM cover. Replace the screw.
2
、
Connect a regular telephone into the socket marked ‘Phone’ indicated on FT5X back
plane.
3
、
Connect a G3 Fax machine into the socket marked ‘Fax’ indicated on FT5X back plane.
Caution: Do NOT plug external line into Telephone socket, or it may cause device
damage.
4
、
Connect a telephone line to the socket marked ‘PSTN” on FT5X back
plane.
5
、
Connect and screw up firmly the included antenna onto SMA
terminator marked “Y” indicated on FT5X back plane.
6
、
Make sure power switch on the back plane is in OFF position.
Afterwards, plug one end of included power adapter into power socket, and plug the
other end into “DC12V” power interface indicated on the back plane.
7
、
Switch on power. when the Status indicator turns dark and the
Network indicator lights continuously. The system goes into normal. network
registration succeed. The device is ready to use.
8
、
Shut down the device.
Press the power switch 3 to 5 seconds; release
the power switch, the Power and Network indicators turn off immediately.
6/31