7. STRIP THE CORDS (5-6 mm).
8. APPLY THE NEW SPARE FASTONS AND FASTEN THEM
TO THE CORD.
9. CONNECT THE MALE FASTONS OF THE NEW BULB TO THOSE
OF THE TWO CORDS. COVER THEM WITH THE CAPS AND RE-
POSITION THE BULB IN THE SEAT OF THE TWO SPRING CLIPS. DO
NOT TOUCH THE BULB WITH YOUR BARE HANDS.
10. REASSEMBLE THE DEVICE BY PERFORMING THE ABOVE TASKS
IN REVERSE ORDER.
7
9
8
10
16
