Procyon Reader User Manual
Revision 1.3
Last modified: 02/09/2015
7 |
P a g e
Direct Computer Connection
Unless the Ethernet port on your host computer supports PoE, a PoE injector is required. The
following diagram illustrates set-up using an injector.
1.
Connect the reader to the PoE injector with a full feature Category-5 Ethernet cable.
2.
Connect the PoE injector to the host computer.
Note: The Procyon reader can also be connected to access points or switches that do not have PoE
support by using a PoE injector as shown below.
Host Computer
PoE Switch
Procyon Reader
Procyon Reader
PoE Injector
Host Computer