SOFT TRAC
®
SYSTEM
The Soft Trac® system is the treadmill’s impact absorption system consisting of a floating deck on triple-cell neoprene strips that run
under both sides of the deck for the entire length of the deck. This system is designed to protect ankles, knees, joints, and back while
providing a comfortable walk or run. Whether you run to the front, middle, or rear of the deck you will enjoy the benefits of the Soft Trac®
system.
HINTS AND TIPS FOR GETTING STARTED
The following hints and tips will assist in training your users to maximize the fitness benefits of your
STAR TRAC E SERIES TREADMILL
.
I
Walk or run at a rate that feels comfortable and most natural, yet is sufficiently vigorous to get a good cardio workout.
I
Try different walking or running rhythms.
In manual operation, adjust your pace from low speed to high speed, then back to
low. As you become more comfortable with your treadmill, try going faster or using the preset programs.
I
Watch the Graphic Display to anticipate terrain changes.
When you use the preset programs, the display shows changes in
terrain as tall or short columns. The display also notifies you of incline changes with a series of beeps and a flashing display ele-
ment.
QUICK START
Quick Start lets you begin your workout by simply pressing one key. Quick Start uses a default weight of 155 pounds and a time limit of
99 minutes. YOU control the treadmill speed, incline and distance for up to the maximum allowed program time.
To operate the Quick Start program:
1.
Stand on the running belt and press the Q
UICK
S
TART
key. The running belt slowly accelerates to its minimum speed of 0.5 mph
(0.8 kph).
2.
You can adjust the incline of the treadmill during the program:
I
You can adjust treadmill incline from 0 to 20%, in 0.5% increments. Press the
key to increase the treadmill incline;
press the
key to decrease the treadmill incline.
3.
You can adjust the speed of the treadmill during the program:
I
You can specify a desired speed from 0.5 to 15 mph (0.8 to 24.0 kph), using the numeric keypad. Use the
keys to
enter your desired speed, then press the
key to accept the entered speed.
I
You can adjust treadmill speed from 0.5 to 15 mph (0.8 to 24.0 kph), in 0.1 mph (or 0.1 kph) increments. Press the
key to increase the treadmill speed; press the
key to decrease the treadmill speed.
4.
You can pause the program during your workout by pressing the S
TOP
key once. The program will pause for a preset period of
time (either 30, 45, 60, 90 or 120 seconds, as set in the Manager Mode). Press the S
TART
key BEFORE the pause timer expires
to resume your program. The treadmill returns to its minimum speed when you exit the pause mode.
5.
When you have reached your workout goal, the treadmill will enter the Cooldown cycle (see “Cooldown Cycle” for more infor-
mation). If you wish to exit your program before you have reached your workout goal, press the S
TOP
key twice. The treadmill
will slow to a stop. (Press the S
TOP
key once during a Pause to exit the program.)
PRESET PROGRAMS
The E Series Treadmill offers 12 preset programs to add variety and challenge to your workout.
A
LPINE
P
ASS AND
R
ANDOM
H
ILL
The climbing programs were designed for optimal interval training. By taking you through various terrains, your caloric expenditure is maxi-
mized and your cardiovascular capacity is improved. When wearing the heart rate strap, or grasping the heart rate contacts, your heart rate
is constantly monitored and displayed in the Heart Rate Window to assist you in getting the most efficient workout possible. The A
LPINE
P
ASS
offers a progressive high level of intensity workout. The R
ANDOM
H
ILL
program offers 250 different terrain configurations to add variety to your
workout.
To operate a climbing program:
During program setup, you can use the
key to return to a previously accepted parameter.
1.
Stand on the running belt; press the
or
key, as desired. You are prompted to enter your weight. You
may enter your weight manually as described below.
STAR TRAC E SERIES TREADMILL O
WNER
’
S
M
ANUAL
19