October, 2012 (Version 7)
STAR TRAC P
ERSONAL
V
IEWING
S
CREEN
O
WNER
’
S
G
UIDE
21
*The IntelliJack self diagnostic headphone circuit detects when the headphone jack has failed or
been damaged. When a faulty headphone jack is detected, a BLUE “headphone” icon appears on
the keypad (see #4 above). It will remain on until a new jack is installed and the circuit is reset. To
reset the faulty headphone jack circuit, insert a known good pair of headphones for 10 seconds.
Intellijack Icon
7. Intellijack - Headphone Jack Replacement
HEADPHONE JACK SCREWS
1) UNSCREW THE JACK ASSEMBLY SCREWS, ALTERNATING LEFT AND RIGHT IN ORDER TO BACK THE ASSEMBLY OUT.
2) REMOVE JACK ASSEMBLY, TIPPING THE FRONT FORWARD SO THE ASSEMBLY WIRES CLEAR THE OPENING.
3) UNPLUGTHE OLD HEADPHONE JACK AND DISCARD. PLUG IN NEW HEADPHONE JACK TO WIRE HARNESS.
4) INSERT NEW HEADPHONE JACK ASSEMBLY, TIPPING IT FORWARD SO ASSEMBLY WIRES CLEAR THE OPENING.
5) ALIGN AND SCREW IN THE HEADPHONE JACK ASSEMBLY SCREWS.
6) RESET HEADPHONE JACK ICON BY INSERTING A KNOWN-GOOD HEADPHONE PLUG INTO THE JACK FOR 10 SECONDS.
IMPORTANT:
Faulty headphones can trigger the headphone jack icon. It is important to test the headphone jack
prior to replacement. If the headphone jack is deemed OK , simply reset the faulty headphone jack (STEP 6).
