Star Trac E- RB 8110, Owner'S Manual

SSTAR

TRAC

E

SERIES

BIKES

OWNER’S

MANUAL 

17 

OPERATING INSTRUCTIONS

Operating the 

STAR TRAC E SERIES BIKE

 is very easy. Simply mount the bike, begin pedaling, and press QUICK START. 

Learning the features and incorporating the 

STAR TRAC E SERIES BIKE

 into your members' fitness programs is just as easy. 

In this chapter, you will learn the display function and how to get the most out of every 

STAR TRAC E SERIES BIKE 

workout. 

IMPORTANT

: Before operating the bike, you must be familiar with the following equipment limitations: 

ƒ

Maximum Weight: Your 

STAR TRAC E SERIES BIKE

 is designed for a maximum user weight of 350 lbs/159 

kg. DO NOT exceed the maximum user weight. 

SEAT ADJUSTMENTS 

Proper seat positioning helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury. Always adjust 
the seat position prior to beginning your workout. 

IMPORTANT

: When adjusting the seat height for either bike, your knee should never completely “lock out” during any portion 

of the cycle pattern. 

Adjusting Seat Height (E-UB Upright Bike) 

When sitting on the seat of your E-UB Upright Bike, your knees should be almost 
fully extended when the pedals are at the lowest point of their rotation. To adjust 
the seat height: 

NOTE: 

When raising the seat, the seat will ratchet up when pulled.  When 

lowering the seat, you must use the seat release knob.  

With the pedal at its lowest point of rotation, stand on the pedal with your knee 
slightly bent. To raise the seat, carefully lift up on the “nose” of the saddle and 
raise the seat to the desired position (the seat release knob does not need to be 
pulled out). To lower the seat, carefully pull out on the seat release knob (located 
at the rear of the seat tube) and lower the seat to the desired position. Release the 
knob, ensuring that the spring retracts to its original position, and that the seat 
stays firmly in place.  

Note your height adjustment (shown on the front of the seat post) for future 
reference. This number is the highest number visible on the seat post.

Adjusting Seat Position (E-RB Recumbent Bike) 

When sitting on the seat of your E-RB Recumbent Bike, your knees should be 
almost fully extended when the pedals are at the lowest point of their rotation. 
To adjust the seat position: 

Sit on the seat and grasp the seat adjustment handle (located under the seat). 
Lift up on the handle, and slide the seat forward or backward on the seat 
carriage to the closest available position that allows your knees to be slightly 
bent toward the lower pedal. Release the handle, ensuring that the spring 
retracts to its original position, and that the seat stays firmly in place.  

Note your height adjustment (shown on the top of the seat rail either in front 
of or behind the seat) for future reference.