12
STAR TRAC E SERIES BIKES O
WNER
’
S
G
UIDE
3.
Install the Seat Post
Carefully slide the seat post into the seat tube.
Pull out on the seat release knob, and slide the seat post fully into the
seat tube. Release the seat release knob.
Install two M4 X 20 socket head screws into the seat sleeve to secure
it. Tighten the screws securely using the 3mm hex wrench.
4.
Install the Pedals
Install the pedals on the pedal cranks using a multi-end wrench or a 5/8-
inch open-end wrench. Tighten the pedals securely.
NOTE:
Turn the left pedal spindle counterclockwise when threading into the
crank arm; turn the right pedal spindle clockwise when threading into the
crank arm.
5.
Install the Display Console
a) Remove (2) Pillips Head Screws from the back of the display. Retain for
later use. Separate the front from the back display. Place the front display
aside on a safe none scratch surface.
b) Insert the cables through the neck.
NOTE:
It may be necessary to have one person support and position the
display console while a second person feeds the cables through the neck.
SEAT
POST
SEAT
RELEASE
KNOB
SEAT
TUBE
Step 3
Step 4
Step 5a
Step 5b
