3.
Install the Seat Frame
Carefully position the seat frame over the seat carriage on the bike
frame, aligning the attachment holes in the sides of the seat frame
with the holes in the seat carriage.
Using the 6mm hex wrench and four M10 X 10 socket head screws,
secure the seat frame to the seat carriage. Tighten all four screws
securely.
4.
Install the Pedals
Install the pedals on the pedal cranks using a multi-end wrench or a
5/8-inch open-end wrench. Tighten the pedals securely.
NOTE:
Turn the left pedal spindle counterclockwise when threading
into the crank arm; turn the right pedal spindle clockwise when
threading into the crank arm.
5.
Install the Display Console
a) Remove (2) Pillips Head Screws from the back of the display.
Retain for later use. Separate the front from the back display. Place
the front display aside on a safe none scratch surface
b) Insert the cables through the neck.
NOTE:
It may be necessary to have one person support and posi-
tion the display console while a second person feeds the cables
through the neck.
16
STAR TRAC E SERIES BIKES O
WNER
’
S
G
UIDE
Step 5b
Step 5a
