CrossTrainer Service Manual
14
CrossTrainer Service Manual Rev A 620-7575
Trouble Shooting - Noises : Bearings
If the Star Trac CrossTrainer makes a squeaking or grinding bearing noise while striding, this process
will help determine if the noise is caused by a bearing.
Check Pillow Block Bolts
1. Use two 9/16 wrenches (or socket) to verify that all 4 bolts and nuts on the upper and lower
crank assemblies are tight.
2. If the bolts are loose, tighten them and check to see if the noise has been eliminated.
3. If the noise continues, proceed with checking the bearings.
.