CrossTrainer Service Manual
18
CrossTrainer Service Manual Rev A 620-7575
Part Installation Procedure - Shrouds
Parts Needed:
x
UB Shroud Lt (721-1075-01)
x
UB Shroud Rt (721-1075-02)
x
UB Shroud Panel Lt (721-1074-01)
x
UB Shroud Panel Rt (721-1074-02)
x
Lower Shroud Lt (721-1072-01)
x
Lower Shroud Rt (721-1072-02)
Tools Needed:
x
3/32 (Allen) Hex Key
x
5/16 (Allen) Hex Key
x
Phillips Head Screwdriver
x
Flat-Head
Screwdriver
Procedure:
Remove the Upper Body Shroud
1. Using the 3/32 inch Allen (hex) key, remove the 6 screws from the left upper body shroud
panel..
2. Carefully remove the UB shroud panel from the frame. Utilize the slit in the panel to remove
completely and set aside.