CrossTrainer Service Manual
23
CrossTrainer Service Manual Rev A 620-7575
Part Installation Procedure - LCB, Batt. And UB Board
The following procedure will cover the process for replacing the Load Control Board, battery or Upper
Body Electronic Board (Star Trac CrossTrainer Elite only).
Parts Needed:
x
Load Control Board (721-1045)
x
Battery
(580-0305)
x
Upper Body Controller – Elite only (721-1044)
Tools Needed:
x
Short Phillips Head Screwdriver
x
1/8 inch (Allen) Hex Key
x
Phillips Head Screwdriver
Procedure:
Remove the Upper Body Shroud Panel
6. Using the 3/32 inch Hex key, remove the 6 screws from the right upper body shroud panel.
Note: If you are replacing the upper body board, remove the left shroud panel.
7. Carefully remove the UB shroud panel from the frame. Utilize the slit in the panel to remove
completely and set aside.