CrossTrainer Service Manual
7
CrossTrainer Service Manual Rev A 620-7575
Diagnostics - Keypad Test
Keypad Test
The Keypad Test can be used to verify that all keys are functioning on the display assembly.
To engage the Keypad Test
1. Enter the Maintenance Mode (see Settings – Maintenance Mode).
2. Press
until Keypad Test is displayed in the information window.
3. Press
to enter the Keypad Test.
4. Press each key on the display. Each time you press a key, the information window will display
which key has been pressed.
5. To exit the keypad test, press
.
If any of the keys do not respond, they may not be functioning and the display keypad must be
replaced.