CrossTrainer Service Manual
8
CrossTrainer Service Manual Rev A 620-7575
Diagnostics - Heart Rate Test, Measurements
Heart Rate Test
Heart Rate can be checked using the Heart Rate Test.
To verify heart rate operation:
1. Enter the Maintenance Mode (see Settings – Maintenance Mode).
2. Press
until Heart Rate Test is displayed in the information window.
3. Press
to enter Heart Rate Test.
4. The display will read TELEMETRY.
a. If checking contact heart rate it will read “CONTACT” and the heart rate number.
b. If checking Polar, the display will read “TELEMETRY” and the heart rate number.
5. To exit the heart rate test, press
.
Measurements Mode
Measurements can be done to verify the voltage of the battery, and the UB motor’s position voltage
feedback*.
To verify the battery voltage:
1. Enter the Maintenance Mode (see Settings – Maintenance Mode).
2. Press
until Measurements is displayed in the information window.
3. Press
to enter Measurements.
4. The display will read “BATT VLT = “and the voltage of the battery.
5. Press “1” to switch to upper-body motor voltage display.
6. The display will read “UB VOLTS =” and the voltage denoting the position of the UB motor.
7. To view motor voltage again, press “0”.
8. To exit the measurements, press
.
*Elite model only.