Settings – Pro Bike (6000 Series)
Created: 06/28/04
•
Preliminary Service Manual
2.3
Pro Bike (6000 Series) Service Manual
Settings – Maintenance Mode (cont.)
Auto Pilot
– Number of times the Auto Pilot program was run since
the last rest (0)
IHR Program
– Number of times the Interval Heart Rate Control
program was run since last reset (0)
CHR Program
– Number of times the Constant Heart Rate Control
program was run since last reset (0)
WI Program
– Number of times the Watts Interval program was run
since last reset (0)
CW Program
– Number of times the Continuous Watts program
was run since last reset (0)
Fit Test
– Number of times the Fit Test program was run since last
reset (0)
Alpine
– Number of times the Alpine program was run since last
reset (0)
Rndm Prog
– Number of times the Random Hill program was run
since last reset (0)
Comm Lost
– Number of times a Comm Lost condition has
occurred (0); Comm Lost occurs when communication between the
Load Control Board (LCB) and display is lost.
Key Down
– Number of times a Key Down condition has occurred
(0); Key Down occurs when a key on the display is stuck closed.
LED Test
– Access to integral LED test function.
Keypad Test
– Access to integral keypad test function.
Heart Rate Test
– Access to integral heart rate system test
function.
Measurements
– Access to integral measurements function.
Auto Status
– Turns on/off the unsolicited status o f the CSAFE
feature.
