Diagnostics – Pro Tread (6000 Series)
Created: 06/28/04
•
Preliminary Service Manual
3.2
Pro Bike (6000 Series) Service Manual
Diagnostics – LED Test
The LED Test can be used to verify that all LED (lights) are
functioning on the display assembly.
To engage the LED Test
1. Enter the Maintenance Mode (see Settings – Maintenance
Mode).
2. Press
until LED Test is display in the information
window.
3. Press
to enter the LED Test. All lights on the display
should be on.
4. Check for any burned out lights.
5. To exit the LED Test, press
.
If any of the LED’s do not illuminate, they may not be functioning
and the display electronics may need to be replaced.
