22
| SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL
25.
Locate the set of pedals along with the corresponding
hardware (Fig. 25).
Hardware
:
M8x1.25x14mm Specialty Hex Bolt
Qty
:
2
Fig. 25
26.
Insert each pedal into its corresponding crank arm (Fig.
26).
Note:
For correct orientation, verify the foot cage is
facing upwards on each pedal when inserting into the
crank arm.
Fig. 26
27.
Using a rubber mallet (Fig. 27); tap the center of each
pedal with medium force to lock the pedals in place.
Fig. 27