30
| SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER’S MANUAL
W
hy
M
aintenance
A regular preventative maintenance schedule with all fitness equipment ensures that products are working at an optimal condition
without affecting the end user experience. To assist in the maintenance regiment; it is recommended to break service into: daily,
weekly, & monthly intervals. Details on each interval can be found in the “Maintenance Intervals” section of this document.
Tools
Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any
time. To assist, Star Trac recommends having the tools listed (Fig. 1) available when performing maintenance.
Tool
Purpose
Crank Puller
Removing cranks & pedals
Metric Allen (Hex Key) Wrench Set
Tightening or removing various Allen head screws
throughout the product.
Metric Sockets Set
Tightening or removing various hex nuts used
throughout the product.
Metric Open Wrench Set
Tightening or removing various hex nuts used
throughout the product.
Square Drive Ratchet Wrenches
To use in conjunction with Allen head and or hex
socket sets.
Torque Wrench
Tightening various critical bolts throughout the
product to specific torque specifications.
Phillips Head Screwdriver Set
Tightening or removing various Phillips head
screws used throughout the product.
Flat Head Screwdriver Set
Prying off specific shrouds from wedged locations.
Fig. 1
