3
620-8006 Rev A
GENERAL
Before using this product, it is essential to read ALL installation Instructions and this
ENTIRE operations manual; the manual describes equipment setup and instructs
members on how to use it correctly and safely.
1. Open-End Wrench (Included)
2. Multi-purpose Wrench (Included)
3. 14mm Socket Wrench (Not Included)
4. 18mm Socket Wrench (Not Included)
5. 18mmHex Wrench (Not Included)
6. 21mm Open-end Wrench (Not Included)
7. Torque Wrench (Not Included)
8. Loctite 242 (Not Included)
9. Loctite 262 (Not Included)
TOOLS REQUIRED
If you are a Factory Certified Installer you must:
•
Adhere to all torque and assembly specifications.
•
Use a CALIBRATED TORQUE WRENCH with the necessary hex key sockets
•
NOT USE a powered drill, powered driver or powered impact tool for any part of the assembly.
•
Complete the assembly checklist on each Star Trac product.
•
Complete the final programming, functional and cosmetic checklists for each Star Trac product.
FACTORY CERTIFIED INSTALLER
Copyright 2011. Star Trac by Core Industries, Inc., Star Trac Fitness, Star Trac®, and the Star Trac Logo are registered trademarks of Core Ind, Inc.
All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
Spin
®
, Spinner
®
, Spinning
®
and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.
Smart Release™ is a registered trademark of Nautilus, Inc.
SPD is a registered trademark of Shimano American Corporation.
Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes
will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners.
