8
620-8006 Rev A
Step 20.
Locate the Pop-pin shown above.
Step 17.
Slide the Handlebar w/ Grip and Water Bottle
Holder onto the Handlebar Post.
Note:
You may have to pull up on the Lock Knob
to help align the Slider Clamp with the guide rail.
Step 18.
Using a 2.5mm Hex Key, tighten the Button Head
Screw all the way down. This screw limits the
travel of the Handlebar and prevents the Handle-
bar from sliding off the Handlebar post acciden-
tally.
Note:
Verify that no gap exists between the head
of the screw and the Handlebar slide rail.
Step 19.
Loosen the Pop-pin and pull it out away from the
Frame Handlebar Post.
Install and slide the Handlebar assembly into the
Frame Handlebar Post.
