TURBO TRAINER Manufactured by STAR TRAC OWNER’S MANUAL |
19
16. Insert the pedal securing bolts into each pedal (Fig. 17)
thru the back of each crank arm and torque each screw
to its final value.
Hardware
QTY
M8x1.25x12mm hex Screw
2
Final Torque
33-37 Lb-Ft (45-50 Nm)
Fig. 16
17. Locate the seat slider and mount the assembly (Fig. 18)
onto the seat post by sliding the post into the seat slider
while pulling on the pull pin under the seat slider.
Fig. 17
18. Install the corresponding stopper bolt (Fig. 19) into the
slider section of the seat post.
Hardware
QTY
M4 x10mm Socket Head Cap Screw
2
Fig. 18