TURBO TRAINER Manufactured by STAR TRAC OWNER’S MANUAL |
21
T
esting
B
ike
Use this checklist to perform the bike test procedure.
Recheck all the bolts and make sure they are all tightened to the proper torque specification (when indicated) and no parts are
missing.
Test the seat post to make sure they move freely and you are able to lock in at different positions.
Check the seat to make sure it is level and tight and does not rotate around or tilt. Tighten and adjust as needed.
Test the seats horizontal adjustment for movement front to rear and check it by settings it at different settings.
Adjust seat post to your needs (Refer to page 23). Ride / test the bike for proper operation according to this owner's manual.
CAUTION
: The movement arms move whenever the pedals are turning. Do Not dismount the bike until the pedals and
movement arms come to a complete stop.
Pedal the bike at a moderate pace and test for proper and smooth movement of the pedals and arms.
When the testing is complete, even the movement arms, and tip the bike forward using the ams and roll it on a smooth surface to
the final location and adjust the leveling feet so the bike is stable.
