STAR
TRAC
E-TBT
TOTAL
BODY
TRAINER
OWNER’S
MANUAL 7
A
SSEMBLY AND
S
ETUP
UNPACKING
NOTE: Do not remove the base from the shipping carton at this time.
Remove the top cover from the shipping carton. Remove all parts and shipping supports (except the base) from the carton, and verify
that the following parts are included in your shipment:
Description Qty
Base
1
Display Weldment
1
Upper Body Arms
2
End Caps
2
Bolt, Allen Head, M8 x 16 mm
4
Description Qty
Bolt, Hex Head, M8 x 20
8
Screw, Phillips Head
8
Flat Washer, M8
4
Set Screw, M8 x 65 mm
1
Lock Washer, M8
8
Note:
If you ordered a PVS kit or an Embedded Display, please refer to the assembly and operating
instructions included with those products for proper setup and operation.
T
OOLS
R
EQUIRED
Your
STAR TRAC E-TBT TOTAL BODY TRAINER
can be assembled using the following tools:
Metric Hex Key Wrenches
Metric Open-End Wrenches
Metric Ratchet Socket Wrench Set
Torque
Wrench
Phillips Head Screwdriver
Your
STAR TRAC E-TBT TOTAL BODY TRAINER
includes a hex key set and combination open-end wrench.
ASSEMBLY
1. Unpack and Position the Base
CAUTION: The rear end of the base is very heavy. Two people are needed to
lift this end when moving the base.
Cut the long edge of the shipping carton base at both ends. Fold the flap down
to make a ramp.
With the aid of a helper, lift the rear end of the base, and roll the base off of the
shipping carton platform. Place the base on the floor in the location where the
unit will be used. Be sure the chosen location is level.
2. Install the Display Weldment
NOTE: You will need someone to assist you to install the display weldment.
Have the person who is assisting you hold the display weldment while you route
the display cables and connect the neck.
Have your helper hold the display close the neck on the base, route the main
I/O cable, auxiliary power and coaxial cable up the full length of the display
neck before seating the display unit on the base.
NOTE: Depending on the display configuration, not all the cables may be used.
Step 1
Step 2a
