22
STAR
TRAC
E-TBT
TOTAL
BODY
TRAINER
OWNER’S
MANUAL
P
REVENTIVE
M
AINTENANCE
With durable, high performance components,
STAR TRAC E-TBT TOTAL BODY TRAINER
is designed for heavy usage with minimal
maintenance required. To keep your trainer in top condition, Star Trac strongly recommends performing the regular daily, weekly and monthly
preventive maintenance routines outlined below.
DAILY MAINTENANCE
Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a non-abrasive liquid cleaner,
such as Formula 409TM or FANTASTIK™. Wipe down the exterior of the display panel, upper body arms, pedals, shrouds and
heart rate grips.
NOTE: DO NOT spray the cleaner directly onto the display panel or heart rate grips.
WEEKLY MAINTENANCE
Perform the following services each week:
Vacuum the floor around the trainer.
Inspect the display panel mounting screws for security, and retighten if necessary.
Check leveling feet and verify all four feet contact the floor and that the unit is stable.
Inspect the display panel keypads for wear.
Inspect rear rollers and guide rods for any contamination or obstructions, remove any loose debris and wipe clean with a clean, dry
lint free cloth.
MONTHLY MAINTENANCE
Perform the following services each month, or as needed:
Check that the pedals and shrouds are secure.
Inspect rear rollers and guide rods for any contamination or obstructions, remove any loose debris and wipe clean with a clean, dry
lint free cloth.
Check the upper body arms for security. Tighten bolts as necessary.
Check the leg beams and lower linkages for signs of wear and tighten hardware as needed
Check for smooth and quiet operation of all moving parts.
Any unusual symptoms, such as a loud continuous noise during operation, should be reported to
STAR TRAC
PRODUCT SUPPORT DEPARTMENT
at (800) 503-1221, or USA 1-714-669-1660.
