3
SPECIFICATIONS
Double Peristaltic Cheese Dispenser, Model CSD-2-H
Capacity:
Four 6 pound bags (Four 2.7kg Bags)
Electrical:
120V; 1050 Watts; 60 Cycle; single phase - or - 230V; 1050 Watts; 50 Cycle; single
phase
Dimensions: 18 1/4" W x 18 1/4" D x 25 3/8" H (46.3 W x 46.3 D x 64.4 H cm)
Net Weight: 45 lbs. (20.4kg)
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels
associated with the unit prior to putting it into operation. Make sure all people associated
with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed.
This unit has been tested and carefully packaged to insure delivery of your unit in perfect
condition. If equipment is received in damaged condition, either apparent or concealed, a
claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection. The carrier will make an inspection and will supply necessary claim forms.
-IMPORTANT-
Read this manual completely before attempting installation.
INSTALLATION
This cheese dispenser is equipped for the voltage and wattage indicated on the nameplate
mounted on the back of the unit, and is designed for use on alternating current (AC) only.
NOTE:
The cheese dispenser should not be installed without the four-inch (10cm) legs provided
with the machine. The legs screw into the nuts on the bottom of the dispenser.
WARNING
DO NOT CONNECT TO DIRECT CURRENT (DC).
GENERAL OPERATING INSTRUCTIONS
This cheese dispenser is designed to be used with a 9” x 14” (22.8 x 35.5cm) poly bag with
a 1 inch (2.5cm) outlet fi tment. The peristaltic pump is designed to be used with 1/4 inch id.
(.6cm) to 1/2 inch id. (1.3cm) tubing with 1/16 inch (.16cm) wall thickness.
The dispenser is designed with a preset non-adjustable thermostat. It is designed to maintain
a product temperature of between 140°F to 160°F.
