ECO Setting Manual
- 4 -
n
Receipt length reduction
The default setting is Original (no reduction).
The printing area can be compressed 50% reduction or 25% reduction lengthwise.
Because the size of printed barcodes is not reduced even if the receipt length reduction
settings are selected, the receipt length will be longer than the length for the reduction
ratio when printing data that contains barcodes.
2-2. Top Margin to First Line
The length from the leading edge of the paper to the first line of printing can be specified.
The default setting is 3mm.
To use the ECO function effectively,
3mm
is recommended. However, the paper will be
automatically rewound after each printing if 10 mm or less is specified for the setting. To
reduce the printing time, specify
11mm
for the setting.
Note
Memo
