background image

2M-Z17244; Owners Manual Omelet Maker

SPECIFICATIONS

Model

Voltage

Amps

Watts

Plug

Weight

SOM7R1E

120V

7.5

900

NEMA 5-15P

IL2677

10”

9.5”

22”

GENERAL OPERATION

This equipment is designed and sold for commercial use only by personnel trained and experienced in its 
operation and is not sold for consumer use in and around the home nor for use directly by the general public in 
food service locations.

INSTALLATION

For your protection, we recommend that a qualified electrician install this appliance.  The electrician should be 

familiar with electrical installations and your local electrical requirements.  Proper connections and power supply 

are essential for efficient performance.  The supply circuit should be properly fused as required by electrical 

code.  Plug the unit into a proper A.C. voltage wall outlet only.  A three-prong plug is provided with the unit.  If an 
adapter is used be sure a good ground is provided.

LOAD

The rated load is on the nameplate. The line in the wall outlet must be heavy enough to carry this load, or the 

waffle baker will be slow in performance.

DO NOT CONNECT TO DIRECT CURRENT (DC).

NON-STICK COATED PLATENS 

DO NOT USE METAL UTENSILS TO REMOVE OMELET FROM THE COATED 

PLATENS. THIS WILL VOID THE WARRANTY.

DO NOT CLEAN NON-STICK PLATENS WITH ABRASIVES.  

THIS WILL VOID THE WARRANTY.

CAUTION

WARNING

CAUTION

CAUTION

Summary of Contents for SOM7R1E









Reviews: