– 11 –
7. Cleaning Cards
There are two cleaning cards per reader/writer to clean the rollers. They are in a plastic
bag.
7-1 External Shape
7-2 Frequency of Use
1. Everyday, or once every 300 prints.
2. If errors occur repeatedly, or if there are printing problems, clean the reader/writer.
3. The cleaning LED will flash when there have been 300 printings. Clean the reader/
writer when this flashes.
7-3 How to Use
Use the following procedures to clean the reader/writer.
1. Press the cleaning switch.
2. Dampen the felt surfaces (both side) of a cleaning card with head cleaning liquid.
3. Insert the cleaning card from the normal card insertion inlet.
4. Allow the reader/writer to sit for approximately one minute before using again, to
allow it to dry.
Note: 1. Do not use bent cleaning cards. Using bent cards can cause them to become
jammed.
2. Use only the accessory head cleaning fluid or dedicated head cleaning fluids
for audio-video equipment. If cleaning cards are dirty, or if you run out of
cleaning fluid, purchase new materials from your sales outlet.
3. Cleaning cards can be used approximately 30 times. Contact your sales agent
if they are damaged or excessively dirty.
Felt Surface
Felt Surface
85.6
89.6
22.0
54.0
Cleaning Switch
