Star TCP400 SERIES, User Manual

Federal Communications Commission

Radio Frequency Interference

 Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pur-

suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment. This  equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the  instruction  manual,  may  cause  harmful  interference  to  radio  communications.  Operation  of  this 

equipment in a residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

For compliance with the Federal Noise Interference Standard, this equipment requires a shielded cable.
This statement will be applied only for the equipments marketed in U.S.A.

Statement of

The Canadian Department of Communications

Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio noise emissions from  digital appara-

tus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux ap-

pareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le 

ministère des Communications du Canada.
The above statement applies only to 

equipments marketed in Canada.

Trademark acknowledgments

TCP400

: Star Micronics Co., Ltd.

Notice

•

All rights reserved. Reproduction of any part of this manual in any form whatsoever, 

without STAR’s express permission is forbidden.

•

The contents of this manual are subject to change without notice.

•

All efforts have been made to ensure the accuracy of the contents of this manual at the 

time of going to press. However, should any errors be detected, STAR would greatly 

appreciate being informed of them.

•

The above notwithstanding, STAR can assume no responsibility for any errors in this 

manual.

©

 Copyright 2005-2007 Star Micronics Co., LTD.