WLAN VDSL Router
User Manual
29
isolation
Network
name (SSID)
Enter a name for user’s wireless network here. SSID stands for Service Set
Identifier. This name must be between 1 and 32 characters long. The default
name is
WLAN
.
All wireless clients must either detect the gateway or be configured with the
correct SSID to access the Internet.
BSSID
Displays the gateway's wireless MAC address. (User may need this address
if user is using WDS or multiple gateways.) Click
Apply
to save changes.
Country
Drop-down menu that allows selection of specific channel.
5.3.2
Security
This page allows you to configure security features of the wireless LAN interface.
You may set up configuration manually or through WiFi Protected Setup(WPS)
1.Click
Security
of
Wireless
item and you
’ll see the following page.
2.Configure WPA Pre-shared key as below and click
Apply/Save
.
3.Enable WPS as below.
