41
WatchLock Cube User Guide
GPS Peek can be
slower
than Transmission when the device is installed in a
remote location for long periods of time, when the GPS update is not really
required. In such case, Transmission can be set for 1 day, for example, and
GPS Peek can be set for 5 days (highest value) to save battery power.
For the testing period, you can set the transmission rates at a higher interval
(e.g., 10 minutes). Once the device is tested, you can set the transmission
rate at a proper working interval (e.g., 5 hours).
Transmission rates also determine how long the battery will stay charged.
Every transmission uses the battery. The faster the transmission rate, the
faster the battery will end.
Please note that these are the regular scheduled Tracking transmissions and
they do not include the additional random transmissions and alerts, like
Open/Close, Location Update, etc., which also use the battery.
Only when weak impact detected
–
when enabled, tracking messages will
only be sent if during the selected period a weak impact was detected.
NOTE
: This will disable the weak impact transmissions.
Standby
–
if "Only weak impact is detected" is enabled use this setting to set
the tracking rate when the device is stationary. This interval must be slower
than the Transmission rate (e.g., use 1 day as Standby and 15 minutes for
Transmission).
When the device is out of GPRS coverage, the messages will be saved to the
device memory. Messages saved in the memory can be sent when the device
resumes the connection to home cellular network, or to the roaming network,
if the SIM card used in the device has a roaming service enabled by your
cellular provider.
SMS
–
select this option if you want the device to transmit messages saved in
the memory via SMS. The device transmits by GPRS by default and by SMS as
a backup when GPRS connection is not available. For more information, see
Appendix A
–
Device Communication in Starcom Systems
.
Roaming GPRS
–
select this option if you want the device to transmit
messages saved in the memory via roaming GPRS. In order for this to work,
the SIM card used in the device must have a roaming service enabled by your
cellular provider.
Summary of Contents for WATCHLOCK CUBE
