6. Click “Restart Controller”, and the following screen will appear. Check the option in the red box, and
then click “Submit”
7. After this screen appears, check the option in the red box again, and then click “Submit”.SR5-WBS2
will restart, and the setup of SR5-WBS2 is completed.
8. Connect SR5-WBS2 to the computer
using the preferred interface connection.
9. Wait for the system to complete initialization as the hard drive status indicator will briefly light up red
then stop. Once this has been completed, you may proceed with the formatting of the system drives.
Note
：
The actual storage capacities may differ from the stated capacities on the hard drives once the
drives have been formatted.
SOHORAID SR5 Series User Manual
9
