6
manufacturer’s instructions.
•
Maintain the vehicle in an area away from exposed flame or persons who
are smoking.
•
Be aware that a vehicle that is not performing as designed is a potential
hazard and must not be operated.
•
Test-drive the vehicle after any repairs or maintenance. All tests must be
conducted in a safe area that is free of both vehicular and pedestrian traf-
fic.
•
Replace damaged or missing warning, caution or information labels.
•
Keep complete records of the maintenance history of the vehicle.
•
Use extreme caution and, if unsure as to the potential for injury, refer the
repair or maintenance to a qualified mechanic.
For the User
General Safety Practices
Like other machines, this vehicle can cause injury if improperly used or maintained.
This section contains broad safety practices applicable to vehicle operations. Be-
fore operation, the user should establish such additional specific safety practices
as may reasonably be required for safe operation.
•
Be aware of pedestrians at all times. Do not drive the vehicle in a manner
that would endanger anyone.
•
Riding on the vehicle by persons other than the operator is authorized
only on personnel seat provided by the manufacturer.
•
When the vehicle is to be left unattended, stop, apply the parking brake,
stop the engine or turn off power, turn off the control or ignition circuit,
and remove the key. Block the wheels if machine is on an incline.
•
Use only approved vehicles in hazardous locations, as defined in the ap-
propriate safety standards.
•
Operators should not add to, or modify, the vehicle.
•
Observe all traffic regulations, including authorized speed limits. Under
normal traffic conditions, keep to the right. Maintain a safe distance, based
on speed of travel, from a vehicle ahead.
•
Do not pass another vehicle traveling in the same direction at intersec-
tions, blind spots, or at other dangerous locations.
•
Keep a clear view of the path of travel, observe other traffic and personnel,
and maintain a safe clearance.
•
Slow down or stop, as conditions dictate, and activate the sound-produc-
ing warning device at intersections and when visibility is obstructed at
other locations.
Summary of Contents for BN72-08-AC-Autodrive-M
Page 34: ...34 6 Electrical Diagrams...
Page 35: ...35...
