Gateway > Port trigger – Custom Page
Use this page to customize port trigger
Field Description
Name
Enter the unique name for the Port Triggers. This is typically the protocol.
Enable
Select the check box to enable the custom Port Triggers you have created
Protocol
Enter the transport protocol used by the Port Triggers
Port Range
Enter the port range used by the Port TriggersSession
Chaining
Certain applications may open up one or more ports in different port ranges to operate properly. The session
chaining parameter is used to indicate whether the Port Triggers should chain subsequent traffic to the initial
session or consider the traffic to be a new session
Session Interval
Enter the session interval appropriate for the custom application you are configuring. If the Port Triggers detects
traffic on the port range within the session interval, it is considered to be traffic related to the initial sessionAddress
Address Replace
Address replacement is required for applications that embedded IP addresses in the data portion of a packet
Multi Host
Multiple host support determines whether the SBG enables traffic to and from a third party host
29
