Instruction manual • Staring Mega 300 •
11 <<
For an optimum adjustment of the mixer blades please
follow the instructions below:
1. Disconnect the mixer from the power supply and ensure
that it is not possible to engage it again.
2. Loosen the screws in the safety cover and remove
the
cover.
Fig.
4a.
3. Remove the centre cover.
Fig.
4b.
4. Loosen the four screws in the clamping device.
Fig.
4c.
5. Set the blades as below:
Dimension A = 0 – 2 mm and
Dimension B = 2 – 5 mm
and tighten the screws. Fig. 4d
6. Insert the centre cover.
7. Place the safety cover and tighten the screws.
8. Restart the mixer.
>> 9. Adjustment of Mixer Blades
Fig. 4b
Fig. 4d
Fig. 4a
Fig. 4c
A
