IMPORTANT SAFETY INFORMATION
GENERAL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future
reference.
SAFETY
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the
operator. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before
operating. Failure to follow the safety rules and other basic safety precautions may result in serious
personal injury.
1
Read and understand all instructions.
Failure to follow all instructions may result in serious injury
or property damage.
DO NOT
allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
DO NOT modify this product in any way.
Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job.
DO NOT
attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended.
DO NOT
use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
I
nspect the work area before each use
. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may
put you dangerously close to cutting tools and rotating parts.
DO NOT use the product where there is a risk of causing a fire or an explosion
; e.g., in the
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the
flammable liquids, gases, or dust.
DO NOT allow the product to come into contact with an electrical source.
The tool is not insulated
and contact will cause electrical shock.
Keep children and bystanders away from the work area while operating the tool.
DO NOT
allow
children to handle the product.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in
your work area.
Some of these hazards may be hidden from your view and may cause personal injury
and/or property damage if contacted.
