Stark 61021, Owner'S Manual And Safety Instructions

PLATE COMPACTOR

15

STORAGE

If the plate compactor will not be used for 
a period longer than 30 days, following the 
steps below to prepare your unit for storage.

Drain the fuel tank completely. Stored fuel 
containing ethanol or MTBE can start to go 
stale in 30 days. Stale fuel has high gum 
content and can clog the carburetor and 
restrict fuel flow.

Start the engine and allow it to run until 
it stops. This ensures no fuel is left in the 
carburetor. Run the engine until it stops. 
This helps prevent deposits from forming 
inside the carburetor and possible engine 
damage.

While the engine is still warm, drain the oil 
from the engine. Refill with fresh oil of the 
grade recommended in the 

Engine Manual

.

Allow the engine to cool. Remove the 
spark plug and put 60 ml of SAE-30 of 
high quality motor oil into the cylinder. Pull 
the starter rope slowly to distribute the oil. 
Replace the spark plug.

1.

2.

3.

4.

Use clean cloths to clean off the outside of 
the compactor and to keep the air vents 
free of obstructions.

5.

Remove the spark plug and drain all 
of the oil from the cylinder before 
attempting to start the unit after 
storage.

Do not use strong detergents or 
petroleum based cleaners when 
cleaning plastic parts. Chemicals 
can damage plastics.

Fold up the wheels bracket.

5.

Carefully fold the  handle down. Do not 
allow control cables to become pinched or 
bent.

Store your plate compactor in upright 
position in a clean, dry building that has 
good ventilation.

6.

7.

MAINTENANCE

MAINTENANCE