WARNINGS: In order to guarantee to operate properly, please cut off the power
before below mentioned procedures.
3.Usage Requirements:
1 ). The storage & transportation environment must be controlled between -40
0
C and 50
°
C, the relative humidity �95%.
2). The working environment must be kept dry, clean and well ventilated, the
environment temperature between -5
°
Cand 40'C, the relative humidity �80%.
3). Please keep the machine out of wind, flammable and dusty conditions.
4).Please keep the machine on the flat level surface, without any inclinations.
5). The voltage shouldn't be lower than or exceed the 10% of the rated one.
6). In order to avoid any injures, it's prohibited to touch any high temperature parts
once the unit is on, including the cylinder head, exhaust pipe, one-way valve and so forth.
7). Please keep the cross section of electrical cable � l .5mm
2
, within the proper length.
8). The usage is limited to supply any air sources for air tools, do not point the air at any
person or animals.
9). Please confirm the machine is "OFF" before turning on the power.
10). Prohibited any collide under any state. In order to avoid any movements
against any outsides pressure, you should take effective practices promptly.
4. Maintenance:
NOTE: In order to avoid injury, all maintenance should be performed with
the power OFF and make sure there is no pressure in the tank.
-2-
