3
ASSEMBLY
1. Insert the rear leg of the stand into the front frame
using the only nut and bolt supplied. Tighten the
bolt using the wrench that is supplied. The rear leg
is also used as a tongue to pull the mixer to another
location.
2. Slide the wheels onto the front frame axle and
insert the cotter pin into the hole in the axle to hold
the wheels in place.
3. Attach the drum rotation base to the motor gear
box assembly frame using the heavy duty anchor
pin. After you connect the motor frame and rotation
base with the anchor pin insert the cotter pin to hold
the anchor pin in place.
4. Slide the rotation base, motor frame assembly
onto the shaft of the cement mixer frame.
