Sivu 9 / 15
7.
OPERATING THE BUCKET SPREADER
Check before driving, that:
-
the machine is correctly installed
-
all locking pins are in place
-
hydraulic connectors are correctly installed
-
hoses are intact
-
there are no oil leaks
-
all functions work properly
-
learn to use the rotating device on closed area before actual usage
7.1.
Using the Rotating device
1.
Check that the attachment and the base machine are compatible in terms of mechanical solutions, hydraulics
and electricity.
2.
The bucket swe
eper is connected to the base machine’s quick hitching (e.g. front loader). Apply the parking
brake. Connect the bucket sweeper to the base machine and make sure the pins are properly locked.
3.
Turn off the base machine and make sure the parking brake is applied.
4.
Make sure there is no pressure in the base machine hydraulic system. When installing, always check that the
hydraulic fittings are clean, and hoses are intact.
5.
When mounting Rotating device to bucket sweeper, lifting arm movement must be restricted by installing
limiting cylinders inside lifting cylinders in aftermarket installations.
6.
When ordering combination of bucket sweeper and rotating device from the factory, lifting arm are already
limited.
7.
Make sure, that watering system manifold is installed below the main beam, as shown in picture 3.
Picture 3. Watering system manifold correct position
