Starke Arvid AB
Lyckåsvägen 3 Tel: +46 522 - 22 000 Fax: +46 522 - 22 344
SE-459 30 Ljungskile
2
Lifting fork to move loads to heights
Introduction
In compliance with accident prevention standards, the company has drafted this instructions booklet to inform users on
the most correct use of lifting forks.
We therefore recommend that before using the equipment, you read and comply with all the instructions.
For further load situations not covered in this booklet, comply with common accident prevention standards.
1. USE AND CONSERVATION OF USER AND MAINTENANCE MANUAL
•
The user and maintenance manual is for those responsible for installation and maintenance and all user operators
during functioning of the equipment,
especially
the parts relevant to
safety
in the workplace.
•
The information contained in the manual is used to indicate the correct use of the equipment, according to the design
and manufacturing purposes planned.
•
Information is also provided on movement, installation, maintenance and servicing, all in compliance with the
limitations set by the manufacturer in the manual.
•
The user and maintenance manual is an integral part of the equipment and should be conserved until its disposal.
The manual should be conserved in a protected place, near the equipment, and easily available for consultation.
•
If the manual is damaged or lost, the user must request a copy from the manufacturer.
•
The manufacturer reserves the right to make changes to the equipment and the manuals, without updating previous
editions.
•
The user can request information and updates which, when issued, becomes an integral part of the user manual.
•
In case of terminating the equipment, it must be terminated with this manual, as specified in the Directive 2006/42/EC.
1.1. Cases where manufacturer declines responsibility
The manufacturer declines all responsibility due to:
•
Incorrect use of equipment or its use by staff untrained for professional use;
•
Use non-compliant with specific standard;
•
Incorrect installation;
•
Serious lack of planned maintenance and servicing;
•
Changes, intervention or handling of any type performed by unauthorised staff.
The manufacturing company declines all responsibility when the lifting forks are not used in complete compliance with
safety standards.
INDEX
1.
USE AND CONSERVATION OF USER AND
MAINTENANCE MANUAL
1.1. Cases where manufacturer declines responsibility
5.
INSTRUCTIONS
5.1. For staff
5.2. For transport and warehousing
5.3.
For use
2.
DESCRIPTION OF FORK
2.1. Technical features
2.2. Dimensions
6.
MAINTENANCE
6.1. Ordinary maintenance
6.2. Replacing spring
6.3. Replacement of the restraint
6.4. Conservation
3.
USE CONDITIONS
7.
USE LIMITATIONS
4.
GENERAL SAFETY SPECIFICATIONS
8.
GUARANTEE
