General use and safety regulations:
• In order to lower the bench to the horizontal position, push the lowering pedal and
pull the bench toward you.
• In order to raise the bench to the vertical position, pull the lowering handle upwards and raise
the bench.
• When transporting and working with 900 mm gypsum boards, fold the
lowering plane in order to centralize the gypsum boards on the bench.
• In order to fi x the rubber wheels in a lowered position, place the pin in the
designated hole in the centre of the bench.
• The sawing support is used to work with pre-sawn gypsum boards standing on edge.
• Maximum load must not be exceeded.
General maintenance and care instructions:
• Check the following daily:
-That the castors can be rotated and braked.
-That there are no damages to the rubber wheels.
• All mobile parts must be greased once a month.
• Check all mobile parts as well as welding joints, wheels and other
material at least once a year.
• Remove any outer rust and coat with anti-corrosive paint..
• Replace worn part..
• When unsure, contact Alia AB.
Dear Customer!
Thank you for choosing a STARKE ARVID® product.
We have more than 25 years of experience within the construction business. We develop,
manufacture and sell equipment intended for professional material management. Starke
Arvid´s product assortment includes a total of 20 different products.
Browse in at www.starkearvid.se
