8
9
On, Off and VOluMe COntrOl
Before placing the BTE with an earmold into your ear,
be sure the battery is inserted and the battery door is
closed securely .
To insert the earmold, hold it with your thumb
and forefinger on the outer side near the tubing .
Gently insert the canal tip into your ear canal .
Then gently press the earmold
into place with your finger .
Carefully place the instrument
over the top of the ear until it
rests securely in place .
To remove, take the instrument
from behind your ear and
gently pull the earmold
outward . Pulling down on
the earlobe may help loosen
the earmold as it is removed .
earMOld insertiOn and reMOVal
To preserve battery life, it is recommended that you
turn your instrument “off” any time it is not in use .
Open the battery compartment to turn the
instrument off .
The volume control enables you to adjust the amount
of amplification provided by the instrument .
You may wish to change volume levels as you
encounter different listening situations . To change
the volume, use your fingertip to rotate the vertical
volume control . Your hearing instruments may
“beep” when you reach the correct setting .
