Operation | 13
12 | Preparation
Helpful Hints
• Minor irritation and/or inflammation may occur
as your ear becomes accustomed to having an
object in it; if so, please contact your hearing
professional�
• If an actual allergic reaction occurs, alternative
earmold materials are available; contact your
hearing professional�
• Severe swelling, discharge from the ear, excessive
wax or other unusual conditions warrant
immediate consultation with a physician�
Power On & Off
ON -
The hearing aids will power on automatically after
removing them from the charger� There is a delay
that allows you time to insert your hearing aid into
your ear�
ON -
If the hearing aid is manually powered off, pressing
the push button will power it on� The delay still
exists, to give you time to insert the hearing aid in
your ear�
OFF -
The hearing aids will power off automatically
when placed on the charging posts� Charging will
proceed�
OFF -
The hearing aids can be powered off manually by
pressing the push button for three seconds�
Auto On/Off
Your hearing aid may support the ability to automatically
go into a low-powered state to conserve battery*� This
control can be configured by your hearing professional
or via the Thrive Hearing Control app� Place your hearing
aid on a flat, stable surface (e�g� a table) with the tip
facing upwards and it will go into a low-powered state
after about 15 minutes� To resume normal hearing aid
function, pick up your hearing aid and place it in your
ear� Your hearing aid will detect this motion and switch
back on again� You may hear a tone indicating that your
hearing aid is powered on�
*Going into a low-powered state helps conserve battery
consumption when used with rechargeable hearing aids
that are charged on a daily basis�
User Controls
Your hearing aid’s user control may have been
customized by your hearing professional� Ask your
hearing professional how the user control on your
hearing aid is set�
