Operation | 17
16 | Operation
Up/Down Volume Control
If your user control is configured as a dedicated up/
down volume control, each time you activate the
user control, the volume of your hearing aid always
changes in a specific direction (either up or down)�
For example, a short press and release may increase
the volume while a long press and hold may decrease
the volume in your hearing aid�
Some user controls can be set for the Right hearing
aid to increase volume and the Left hearing aid to
decrease volume� Ask your hearing professional if this
setting would benefit you�
Rotary Volume Control
Your hearing aid may be
equipped with a rotary volume
control� Ask your hearing
professional if you are not sure�
To make volume adjustments,
use your fingertip to rotate the
volume control�
1� To make sounds louder,
continue to rotate the
control forward, toward
your nose�
2� To make sounds softer, use
your fingertip to rotate the
control toward the back of
your head�
Increase Volume
Decrease Volume
Volume Control Indicators
Your hearing professional may enable audible
indicators, which highlight the current volume
position�
Battery Indicators
An indicator will sound when the battery voltage is
low� You have approximately 30 minutes* of battery
life remaining� An indicator may also sound just before
the battery stops working�
*Actual time between low battery indicator and shut down will vary depending
on environmental noise levels and your use of the product.
Volume Level
Tone
Volume Max
5 Beeps •••••
Volume Step(s)
Short Tone
–
Volume Home
(Power on volume level)
3 Beeps •••
Volume Step(s)
Short Tone
–
Volume Min
Single Beep •
My hearing aid is configured with the following
control:
Press and Release Volume Control
Press and Hold Volume Control