12
direct audio input
Your BTE is compatible with
Direct Audio Input (DAI). This
allows you to connect your
instrument to another elec-
tronic sound source, such
as a wireless FM system or
audio and video equipment.
To use DAI, slide
the DAI module onto the bottom
of the BTE, until it “clicks” into
place. The DAI’s gain control
should be turned fully counter-
clockwise, so that it is pointing
to the thickest part of the shading.
When the DAI module is
attached, the instrument’s
telephone coil is not active.
Remove the module when
using the telephone coil
memory.
To remove the module, hold
the BTE and DAI module and
gently twist the two apart.