Batteries
Your hearing aid uses a battery as its power source.
To insert or replace the battery:
1. Use the finger pick to gently open the battery door.
2. Remove the old battery.
3. Remove the colored tab from the new battery.
For best results, wait 3-5 minutes after removing
the tab before inserting the battery.
4. Insert into the battery door, “+” side up.
5. Close the battery door.
Battery Indicator
You will hear an indicator
through your hearing aid
when battery voltage
is low and the battery
needs replacing.
Receiver-In-Canal (RIC) 312
PRODUCT GUIDE
2
3
1
4
5
Hearing Aid Care
Cleaning Your Hearing Aids
• Use the cleaning brush or soft cloth to clean debris from around the
user control, microphone, battery compartment, receiver and earmold.
• Never use water, solvents, cleaning fluids or oil to clean your hearing aid.
Changing Hear Clear Wax Guards
1. Hold onto the cable where the receiver enters the earmold.
2. Insert the empty end of the application stick straight into the used wax guard in the receiver.
3. Pull the stick straight out to remove the used wax guard (do not twist).
3
2
1
