Pairing
(Continued)
Pairing outside of Inspire X
1
Power off any mobile phone or other accessories
that were previously paired with the hearing aids.
2
Ensure the Mini Remote Microphone is powered on.
3
Power off, then power on the hearing aids
to place in pairing mode.
4
Place the hearing aids within six inches
of the Mini Remote Microphone.
5
Place the Mini Remote
Microphone in pairing mode
by double clicking the power
button. The LED status indicator
will alternately blink blue and red.
6
A green LED will blink for each
hearing aid to confirm a successful pairing.
How it Works
The Mini Remote Microphone
allows the hearing aid
wearer to focus on a single
speaker when background
noise is present. While not
optimized as a general
purpose omni-directional microphone for tabletop
use, the Mini Remote Microphone may also provide
benefit for television watching. Place the Mini Remote
Microphone near the television speakers. To achieve
a comfortable listening level, adjust the Mini Remote
Microphone distance from the television speakers or
modify the audio streaming volume level.
To begin streaming from the
Mini Remote Microphone:
1
Ensure the Mini Remote Microphone is powered on
by pressing the power button for three seconds.
2
Streaming starts automatically in the hearing aids.
3
When finished, power off the Mini
Remote Microphone to stop streaming.
Audio streaming will stop when:
•
The Mini Remote Microphone is powered off.
•
A Phone call is received via a direct mobile phone
stream into the hearing aids. After the phone call
concludes, all streaming stops. If desired, the
Mini Remote Microphone stream will need to
be manually restarted.
•
If the user walks out of range of the Mini Remote
Microphone, up to 65 feet or 20 meters, streaming
stops and will need to be manually restarted.
x2
5
