background image

Volume up

Power on/off

Pair

Volume down

Pairing   

The TV Streamer must be paired to interact with compatible 2.4 GHz hearing aids on the Thrive platform. 

Pairing occurs once, then the hearing aids and TV Streamer will automatically recognize each other.

1

   Power off your smart device or other accessories 

that were previously paired with your hearing aids.

2

   Ensure the TV Streamer is powered on.

3

   Power off, then power on your hearing aids to 

place in pairing mode.

4

   Place your hearing aids within 6 inches 

of the TV Streamer. 

5

   Press the pairing button on the TV 

Streamer to place in pairing mode. 

The LED will rapidly blink blue.

6

   Once the LED blinks green 

for each hearing aid, both 
hearing aids are paired.

Basic Setup   

5

TV Streamer

A

B

C

D

Power Supply Jack (microUSB)

A

Toslink Jack

B

Analog 3.5mm Jack

C

Mono/Stereo Switch

D

1

   Remove the plastic caps from each end of the 

TOSLINK cable.

2

   Plug the TOSLINK cable into the Audio OUT 

jack of your television. If there is no TOSLINK 
audio OUT jack, use a 3.5mm to RCA cable. 

3

   Power on your television.

4

   Plug the other end of the TOSLINK cable 

into the rear of the TV Streamer 

B

.

5

   Insert the power adapter microUSB connector 

into the rear of the TV Streamer 

A

.

6

   Plug the power adapter into the wall socket.

7

   Turn on the TV Streamer. A solid green LED 

indicates power is on.

8

   A solid blue LED indicates the TV Streamer 

has detected audio and is streaming.

Reviews: